Electric Hydraulic Offshore Pedestal Telescopic Boom Crane

Model NO.: GHE-0.85T31M-TB-00 Crane Min.Lifting Capacity: 4t@30m Crane Min.Working Radius: 3m Crane Power Rate: 55kw Trademark: GHE Specification: ABS CCS BV RMRS DNV CERTIFICATES HS Code: 84269900 Crane Max. Lifting Capapcity: 24t@3m Crane Max.Working Radius: 30m Crane Max.Lifitng Height: 45m Crane Power Source: up to The Avaible Power Source Transport Package: with Steel Structures Origin: Co; Form a; Form B; Formc; Forme; General introduction
This Hydraulic crane  or pedestal crane especially wildly been used in the mild-east area for the OSV (oil service vessel); which is especialy designed according to the harsh working environment there. This electric hydraulic station can be designed in integrity inside the crane or seperately located on the ship deck. And to offer better after-sales service in case any broken , there is after-sales point in Saudi Arabia, which ensure the spare parts are avaible within 1 or 2 days in that area.
The Hydraulic Offshore Support Marine Crane Hydraulic telescopic boom Ship Crane is controlled by an open platform above the slewing ring. All motions have stepless   speed from 0 to maximum, solo motion each (hoisting ,telescopic ,slewing or luffing) can be done
with full load and full speed.
Electric motor is squirrel-cage Hydraulic Telescopic Boom Ship Crane, wind cooler, which is suitable to use in deck outdoor, IP56, including AC440V ,60Hz,3P ,space heater AC230V 60Hz,1P, working duty:S1.Motor starts output one running signal(NO/NC) to IAS.


Surface treatment:Short-blasted to ISO standard SA2.5 grade Hydraulic Offshore Support marine crane

Painting specs suitable for offshore environment as follows:
1,painting system:The coating system(paint) consists of one paint coat in end layer, with a total of 100 microns of thickness.
2,two component high bulid polyamide cured epoxy primer,60 micron.A polyurethane coat,40-50 microns thick,dry film.
3,final color(RAL-code) to be specified by owner Hydraulic Offshore Support Marine Crane

A starter is Star-Delta located in the HPU Hydraulic Telescopic Boom Ship Crane.Protection class:IP56, control voltage:AC440V ,60Hz,The starter is standard, including hour meter, ammeter, power indicator, start/stop button and remote control start/stop button with SS316L(IP66) protection cover is mounted on the operating platform.Color of control box is musell7.5BG7/2
       2,Techcnial Parameters of this Hydraulic Crane /Pedestal crane with electric hydraulic system

1	CRANE TYPE	GHE-0.85T31M-TB-00 Hydraulic Crane
2	CERTIFICATION	CCS classification certification
3	QUANTITY	4set
4	HEEL/TRIM	5°/3°
5	AMBIENT TEMPERATURE	Minus9.9°C  to 45°C
6	SWL	0.85T at 31M&24t@3m
7	MAX WORKING DADIUS	31m
8	MIN WORKING DADIUS	3m
9	HOISTING SPEED	0 to 15m/min to 20m/min
10	LIFTING HEIGHT	Approx.35m
11	HEIGHT OF FOUNDATION CYLINDER	2m
12	SLEWING ANGLE	360°
13	SLEWING SPEED	0 to 0.6r/min
14	LUFFER TIME	70s
15	SELF WEIGHT OF CRANE	26t Confirmed in approval drawing
16	POWER SUPPLY	440V 60Hz 3P or pending
17	POWER OF MOTOR	Approx. 47 kW

Contact us if you need more details on Electric Hydraulic Crane. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pedestal Crane、Marine Crane. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : hydraulic marine crane > Others hydraulic marine crane